Other codes and keywords include
Annn � an orientation, or second x- axis spline control point
Bnnn � an orientation, or second y-axis spline control point
Cnnn � an orientation, or second z-axis spline control point, or chamfer
Fnnn � a feed value ( in ipm or m/s, not ipr) or thread pitch
Innn - x � axis center for circular interpolation, or first x-axis spline control point
Jnnn - x � axis center for circular interpolation, or first y-axis spline control point
Knnn - x � axis center for circular interpolation, or first z-axis spline control point
Lnnn � arc angle , loop counter and program cycle counter
Nnnn � a sequence/line number
Onnn � subprogram reference plane for tool movement, or arc radius, or taper value
Pnnn � subprogram block number
Rnnn � a clearance plane for tool movement, or are radius, taper value
Qnnn � peck depth for pecking cycle
Snnn � cuttion speed (rpm), spindle speed
Tnnn � a tool number
Unnn � relative motion in x
Vnnn � relative motion in y
Wnnn � relative motion in z
Xnnn � an x-axis value
Ynnn � a y-axis value
Znnn � a z-axis value
:- starts a comments (prolight Miil), or end of block (EMCO Lathe)
|
